-
LED Motion Sensor Night Light
→ Light color: white/warm white
→ Size: 15cm 10leds. 21cm 14leds. 30cm 20leds. 50cm 36leds
→ Power supply mode: USB charging(Rechargeable Battery inbuilt.)
→ Switch: Inductive
→ Sensing distance: about 2-5m
→ Sensing range: about 120 degrees
→ Material: Aluminum.
→ Three modes: always on; induction; off;
→ Fast charging: about 2-4 hours full,
→ Aluminum shell, matte texture, fast heat dissipation, beautiful and durable;
→ Easy to disassemble without wiring, with magnet, free to change position;
→ High-quality LED lamp beads, soft lighting, long-term use does not hurt the eyes.
$11.95 -
Hue Dimmer Switch
- Include: 1 Smart Bulb Kit
- Wattage: watts
- Warranty: 1 year on product
- Hue bridge the heart of your Philips hue system
- Start building or expanding your ecosystem with this hue bridge
- Hue-ify your home add up to 50 Philips hue lights to a single hue bridge
- Control your lights the way you want from wherever you are
$37.40Hue Dimmer Switch
$37.40 -
Smart Home Ki Socket (RGB)
→ Avoid pressing too hard on the device body, rest button, and connecting ports.
→ Make sure you are connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depend on it.
→ This plug requires the UK head and is accepting any UK plug appliances.
→ Keep the device within WiFi range
→ Adding Ki Socket: Set Nagki App to add mode. Press and hold the Side On button for 10 seconds until the LED blink in red color and the app display’s “device found”
→ Removing Ki Socket: Press and side button for 10 seconds
→ Factory Reset: Press and hold panel button for 15 seconds
→ Model Number: 312-0007, Ki Socket (RGB)
→ Power : 100-240V, 50-60Hz
→ Scene light: RGB
→ Dimensions (L*W*B): 40*30*30mm
→ Maximum Load: 240V, 16A
→ Weight : 300g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
$40.20Smart Home Ki Socket (RGB)
$40.20 -
Nagki RGB Smart Light
→ The RGB LED bulb fits a wide variety of light sockets with 16million color setting and cool and warm white, It adds whole new dimension to lighting in your room
→ E14
→ E27
→ GU10
→ GU5.3
→ RGBWC Light
→ Dimmable
→ Save Electricity
→ 2.4GHz WIFI
→ App control
→ Schedule Control
→ Keep the device within WIFI range
→ Adding RGB LED bulb: Set Nagki App to add mode turn on and off the power to the bulb 3 times until the light in the Bulb blink and the app displays “device found”
→ Removing RGB LED bulb: Turn on and off the power 3 times
→ Factory Reset: Turn on and off the power 3 times
→ Model Number: 312-0021 RGB LED Bulb
→ Power Rating: 10 W
→ Lumen: 1100
→ Dimensions (L*W*B): 12.5*6.5*6.5cm
→ Power: 100-240V, 50-60Hz
→ Weight: 150g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
$41.20Nagki RGB Smart Light
$41.20 -
Smart Home Controller
→ The Ki controller is able to control IR/RF electronics like Fan, TV, Air-Con, Speakers and more. Add your existing appliances to your smart home easily with the ki controller
→ 360° wide coverage
→ Schedule control
→ 2.4GHz WiFi
→ App control
→ Plug and play
→ Model Number: 312-0008 Ki Controller (IR/RF)
→ Infrared Frequency: 38-56k
→ Radio Frequency: 315-433Mhz
→ Dimensions (L*W*B): 60*60*40mm
→ Power: 12v, 1A (Type-C USB)
→ Weight: 200g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WiFi
→ Avoid pressing too hard on the device body, reset button, and connecting ports
→ Make sure you are connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depend on it
→ Power on using USB socket
→ Ensure Ki controller have line of sight to device you are trying to control
$50.40Smart Home Controller
$50.40 -
Smart Home Link Switch
→The link switch is a battery powered switch that can sync and control any smart home device
→Place this switch anywhere with its double sided tape
→Set your favorite scenes setting to each button of the switch for easy and quick controls
→Long battery life
→Fully customizable
→Zigbee Solution
→App control
→Schedule control
→Model Number: 312-0009 Ki Controller (IR,RF)
→Button cycle: 500,000
→Battery type: CR 2430
→Dimensions(L*W*B): 86*86*13mm
→Power: 10uA
→Weight: 60g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless protocol: Zigbee
→Avoid pressing too hard on the device body, reset button, and connecting ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
$50.40Smart Home Link Switch
$50.40 -
Ki Motion Sensor
→The Ki Motion Sensor can work dependently without a hub, it can accurately detect movement in the room, push and start scenes
→Set it to turn on your lights when you enter a room, or turn off all devices when you leave a room
→Avoid pressing hard on the device body, reset button, and connection ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
→Long battery Life
→Anti white light
→Real time monitoring
→2.4GHz WiFi
→App control
→Schedule control
→Model Number: 312-0010 Ki Motion Sensor
→Detection Angle: 110°
→Detect Range: 12m
→Battery type: 2* AAA
→Dimensions (L*W*B): 137*60*43mm
→Power: 35mA
→Weight: 60g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless Protocol: Zigbee
$56.20Ki Motion Sensor
$56.20 -
Link Gateway
→ The Link Gateway is the processing unit for Zigbee connected device used for home automation. Through out Nagki App, 60+Zigbee device can be connected and controlled
→ Avoid pressing too hard on the device body, rest button, and connecting ports.
→ Make sure you are connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depend on it.
→ Keep the device within WiFi range
→ Adding Link Gateway: Set Nagki App to add mode. Press and button on the back for 6 times until only red LED blinking rapidly and the app display’s “device found”
→ Removing Link Gateway: Press and hold back button for 10 seconds
→ Factory Reset: Press and hold back button for 15 seconds
→ Model Number: 312-0002, Link Gateway (Zigbee)
→ Protocol : WiFi Zigbee
→ Dimensions (L*W*B): 65*65*13mm
→ Power Rating : DC 5V
→ Connect Device: 60-85pcs
→ Weight : 150g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WiFi, Zigbee
$60.50Link Gateway
$60.50 -
Ki Fire Alarm
→The Ki Fire Alarm has a reliable smoke detection function: the thermal sensor will warm before a fire outbreak, 85 dB loud warning, mute function in the case of false alarm, and notify users when the alarm occurs.
→Photoelectric smoke detection and thermal sensors ensure reliability
→Avoid pressing hard on the device body, reset button, and connecting ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
→Ensure the Ki fire alarm is at least 50cm away from stove or any fire source
→Long battery life
→Smart alarm
→2.4GHz WIFI
→App control
→Plug and play
→Model Number: 312-0017 Ki Fire alarm
→Power: 5V DC
→Battery: 2* AAA Battery
→Dimensions (L*W*B): 125*125*35mm
→Monitoring Range: 30Sqm
→Weight: 250g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless protocol: 2.4GHz WIFI
→Keep the device within WIFI range
→Adding Ki Fire Alarm: Set Nagki App to add mode, Press and hold front button for 10 seconds ntil the all the LEDs blink in red color and the app displays “device found”
→Removing Ki Fire Alarm” Hold the button on the back for 10 seconds
→Factory Reset: Press and hold panel button for 15 seconds
$61.30Ki Fire Alarm
$61.30 -
Hue Motion Sensor
- The Philips Hue Smart Motion Sensor combines convenience and energy effeciency. Have your lights turn on when you walk into a room, and off when you leave. The Smart sensor detects optimum daylight levels to conserve energy during the day
- During the night the Philips Hue Motion Sensor will switch to smart night light settings: a gentle, warm light setting to help you navigate during the night without disturbing your rest
- The Philips Hue Motion Sensor can be placed freely for an optimal detection area, or mounted to a wall using screws (included). The device is battery powered, wireless and installation free (no re-wiring required) to control your lights without hassle
- Place anywhere in your home including your hallway, bathroom, kitchen, and more. The integrated light sensor saves energy by detecting when rooms are vacant and automatically turning off lights
- Installed in a minute. Simply follow the instructions in the Philips Hue app. Our smart lights default settings get you going, or personalize these settings to fit your needs
- The Philips Hue motion sensor requires a Philips Hue bridge to make it part of your smart home lighting system. The Philips Hue system can control up to 50 smart lights
- When you use the Philips Hue motion sensor with a Philips Hue bridge, you can use it to control any HomeKit compatible appliance
$63.00Hue Motion Sensor
$63.00 -
HUE Outdoor Motion Sensor
- Wireless installation
- Battery powered
- Weatherproof
- Automates your lights
$79.88HUE Outdoor Motion Sensor
$79.88 -
Philips Hue Bridge
- Simple setup
- Smart control
- Add up to 50 lights
- Control with your voice
$83.42Philips Hue Bridge
$83.42