-
Ki Fire Alarm
→The Ki Fire Alarm has a reliable smoke detection function: the thermal sensor will warm before a fire outbreak, 85 dB loud warning, mute function in the case of false alarm, and notify users when the alarm occurs.
→Photoelectric smoke detection and thermal sensors ensure reliability
→Avoid pressing hard on the device body, reset button, and connecting ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
→Ensure the Ki fire alarm is at least 50cm away from stove or any fire source
→Long battery life
→Smart alarm
→2.4GHz WIFI
→App control
→Plug and play
→Model Number: 312-0017 Ki Fire alarm
→Power: 5V DC
→Battery: 2* AAA Battery
→Dimensions (L*W*B): 125*125*35mm
→Monitoring Range: 30Sqm
→Weight: 250g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless protocol: 2.4GHz WIFI
→Keep the device within WIFI range
→Adding Ki Fire Alarm: Set Nagki App to add mode, Press and hold front button for 10 seconds ntil the all the LEDs blink in red color and the app displays “device found”
→Removing Ki Fire Alarm” Hold the button on the back for 10 seconds
→Factory Reset: Press and hold panel button for 15 seconds
$61.30Ki Fire Alarm
$61.30 -
Ki Gateway
→The Ki Gateway is the brain for all Smart Home Eco System. It connect and control all WIFI enabled smart home device.
→It also acts as an integrated WIFI Mesh that is able to broadcast and repeat WIFI Signal, extending their effective range and stabilizing your network connections
→End to End Encryption
→Network Acceleration
→Dual Bands Frequency
→Gigabit Speeds (1200Mbps)
→Universal Gateway
→2.3/5GHz WIFI
→App Control
→Plug and Play
→Avoid pressing too hard on the device body, rest button, and connecting ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
→Press and hold the reset button for 6 seconds, then the indicator light flashes and then release. The indicator light turns on and the system restarts. The last replay flashes to restore the factory settings.
→Long green light: good connection quality
→Long yellow: the connection quality is normal
→Red long light: connection failed
→Model Number : 312-006, Ki Gateway (WIFI Mesh)
→LAN ports: 1
→WAN ports: 1
→Dimensions (L*W*B): 100*100*95mm
→Power: 12V, 1A
→Weight: 300g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless Protocol: 2.4GHz, 5GHz WIFI
→Transfer Rate: 300Mbps, 1000Mbps
→Nagki app offers an intuitive dashboard and the most comprehensive solution to mange your smart home
$420.50Ki Gateway
$420.50 -
Liven Automatic Lifting Electric Hot Pot
- Intelligent lifting
- Fast heating
- Split design
- Fifth gear fire control
- High temperature protection
$96.52 -
Smart Home Starter Kit
→ Add automation to your existing appliances
→ Compatible with most of your household appliances Aircon, TVs, Fans, Speakers.
→ Turn your connected devices into smart devices
→ Enabling control from your phone, and even adding them into your favorite smart routines.
→Nagki empowers you to stay connected to you home no matter where you are,
→Get connected in minute with Nagki’s specialized paring
→Once you set up Nagki App, it easy to add lights, sensors, camera, and more to enhance your Nagki Smart home
→Hundreds of connected products gives you freedom to design you ideal smart home
→TRUE UNIVESAL CONTROL
→Add Automation to your existing appliance
→Compatible with most of your household appliances Aircon, TVs, Fans, Speakers
→Turn your connected devices into smart device Enabling control from you phone, and even adding them into your favorite smart routines
→Nagki app offers an intuitive dashboard and the most comprehensive solution to mange your smart home
$193.20Smart Home Starter Kit
$193.20 -
Link Gateway
→ The Link Gateway is the processing unit for Zigbee connected device used for home automation. Through out Nagki App, 60+Zigbee device can be connected and controlled
→ Avoid pressing too hard on the device body, rest button, and connecting ports.
→ Make sure you are connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depend on it.
→ Keep the device within WiFi range
→ Adding Link Gateway: Set Nagki App to add mode. Press and button on the back for 6 times until only red LED blinking rapidly and the app display’s “device found”
→ Removing Link Gateway: Press and hold back button for 10 seconds
→ Factory Reset: Press and hold back button for 15 seconds
→ Model Number: 312-0002, Link Gateway (Zigbee)
→ Protocol : WiFi Zigbee
→ Dimensions (L*W*B): 65*65*13mm
→ Power Rating : DC 5V
→ Connect Device: 60-85pcs
→ Weight : 150g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WiFi, Zigbee
$60.50Link Gateway
$60.50 -
Ki Motion Sensor
→The Ki Motion Sensor can work dependently without a hub, it can accurately detect movement in the room, push and start scenes
→Set it to turn on your lights when you enter a room, or turn off all devices when you leave a room
→Avoid pressing hard on the device body, reset button, and connection ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
→Long battery Life
→Anti white light
→Real time monitoring
→2.4GHz WiFi
→App control
→Schedule control
→Model Number: 312-0010 Ki Motion Sensor
→Detection Angle: 110°
→Detect Range: 12m
→Battery type: 2* AAA
→Dimensions (L*W*B): 137*60*43mm
→Power: 35mA
→Weight: 60g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless Protocol: Zigbee
$56.20Ki Motion Sensor
$56.20 -
Smart Home Link Switch
→The link switch is a battery powered switch that can sync and control any smart home device
→Place this switch anywhere with its double sided tape
→Set your favorite scenes setting to each button of the switch for easy and quick controls
→Long battery life
→Fully customizable
→Zigbee Solution
→App control
→Schedule control
→Model Number: 312-0009 Ki Controller (IR,RF)
→Button cycle: 500,000
→Battery type: CR 2430
→Dimensions(L*W*B): 86*86*13mm
→Power: 10uA
→Weight: 60g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless protocol: Zigbee
→Avoid pressing too hard on the device body, reset button, and connecting ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
$50.40Smart Home Link Switch
$50.40 -
Link Blind Controller
The Link Blind Controller is a motor for your blinds.
→Set Blinds automation like opening in the morning and closing at night.
→With its multiple adapters, it can be used on Venetian blinds, vertical blinds, honeycomb blinds, triple shade, roller shade, zebra shade.
→Solar charged
→Touch-Start Function
→Schedule Control
→Zigbee Solution
→App control
→Plug and play
→It is always advised to consult a certified installer to perform the installation process
→Ensure the blinds type matches the technical specifications
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the device as range and performance depend on it.
→Model Number: 312-0013 Link blind controller
→Power: 5V DC
→Battery: Rechargeable Lithium Polymer (included)
→Dimensions (L*W*B): 16.4*4.5*4cm
→Power source: 5V DC, Solar Panel
→Weight: 1300g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless Protocol: Zigbee
$225.50Link Blind Controller
$225.50 -
Nagki Ambience Light
→ The Nagki Ambience Light is a Minimalism metal straight angle floor lamp, for home and lighting decoration.
→ It has 16 Million colors changeable and warm light for your choice.
→ It brings vibrance to any living space.
→ RGBWC light
→ Plug and Play
→ 2.4GHz WIFI
→ App control
→ Schedule control
→ Model Number: 312-0011 Nagki Ambience Light
→ Colors: Red, Green, Blue, Cool White, Warm White
→ Material: Aluminum
→ LED type: 5050
→ Dimensions (L*W*B): 140*35*35cm
→ Power: 5V DC
→ Weight: 1.5Kg
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
→ Ensure power is plugged into the 3 pin UK plug
→ Ensure the power cable is not bend into a knot
→ Kindly take care of the distance between the devices as range and performance depends on it
$102.20Nagki Ambience Light
$102.20 -
Power Wall Charger Plug Adapter
→ Type: Electric
→ Usage: Mobile Phone
→ Material: ABS, PVC, ABS, ABS+PVC
→ Protection: ovp, ocp
→ Function: PD
→ Brand Name: NAGKI
→ Model Number: I-0589 Port: 1 x USB Output: 5V/1A
→ Place of Origin: China
→ Supports Solar Energy: No
→ Keywords: charger
→ Products Status: Stock
→ Package: opp bag
→ Company Type: Factory
→ OEM: Accept
→ USB Type: Standard
→ Color: White
→ Input: 100-240VAC 50/60HZ
$10.85 -
Nagki Doorbell Camera
→ The Ki Doorbell Camera is our front door camera with two way audio access
→ It comes with motion detection even in the nights and will record for suspicious movement
→ It even notify the users in our Nagki App, if there are suspicious movements
→ Avoid pressing too hard on the device body, reset button, and connecting ports
→ Make sure you connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depends on it
→ Ensure device have sufficient battery
→ Night Vision
→ Two Way Audio
→ Plug and Play
→ 2.4GHz WIFI
→ App Control
→ 32gb SD Memory
→ Model Number: 312-0022, Ki Doorbell Camera
→ Data Storage: Micro SD card, Cloud
→ Video Compression: H.264
→ Resolution: HD: 1920*1080; SD: 704*576
→ Infrared Night Version: 10m Black and White
→ Auto: Two-way, Speaker and Mic
→ Dimensions (L*W*B): 140*35*35CM
→ Power: 5V DC
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
→ Keep the device within WIFI Range
→ Adding Ki Doorbell Camera: Set Nagki App to add mode press and the button below camera for 10 seconds until the sound “please config network”
→ Place QR code from the app 15-30cm in front of the camera The app display’s “device found”→ Removing Ki Doorbell Camera: Hold the button on the back for 10 seconds
→ Factory Reset: Press and hold panel button for 15 seconds
$195.20Nagki Doorbell Camera
$195.20 -
Nagki RGB Smart Light
→ The RGB LED bulb fits a wide variety of light sockets with 16million color setting and cool and warm white, It adds whole new dimension to lighting in your room
→ E14
→ E27
→ GU10
→ GU5.3
→ RGBWC Light
→ Dimmable
→ Save Electricity
→ 2.4GHz WIFI
→ App control
→ Schedule Control
→ Keep the device within WIFI range
→ Adding RGB LED bulb: Set Nagki App to add mode turn on and off the power to the bulb 3 times until the light in the Bulb blink and the app displays “device found”
→ Removing RGB LED bulb: Turn on and off the power 3 times
→ Factory Reset: Turn on and off the power 3 times
→ Model Number: 312-0021 RGB LED Bulb
→ Power Rating: 10 W
→ Lumen: 1100
→ Dimensions (L*W*B): 12.5*6.5*6.5cm
→ Power: 100-240V, 50-60Hz
→ Weight: 150g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
$41.20Nagki RGB Smart Light
$41.20