• Ki Fire Alarm

    The Ki Fire Alarm has a reliable smoke detection function: the thermal sensor will warm before a fire outbreak, 85 dB loud warning, mute function in the case of false alarm, and notify users when the alarm occurs.

    →Photoelectric smoke detection and thermal sensors ensure reliability

    →Avoid pressing hard on the device body, reset button, and connecting ports

    →Make sure you are connected with internet before installation

    →Kindly take care of the distance between the devices as range and performance depend on it

    →Ensure the Ki fire alarm is at least 50cm away from stove or any fire source

    →Long battery life

    →Smart alarm

    →2.4GHz WIFI

    →App control

    →Plug and play

    →Model Number: 312-0017 Ki Fire alarm

    →Power: 5V DC

    →Battery: 2* AAA Battery

    →Dimensions (L*W*B): 125*125*35mm

    →Monitoring Range: 30Sqm

    →Weight: 250g

    →Wireless Range: 100m outdoor, 15m indoor

    →Wireless protocol: 2.4GHz WIFI

    →Keep the device within WIFI range

    →Adding Ki Fire Alarm: Set Nagki App to add mode, Press and hold front button for 10 seconds ntil the all the LEDs blink in red color and the app displays “device found”

    →Removing Ki Fire Alarm” Hold the button on the back for 10 seconds

    →Factory Reset: Press and hold panel button for 15 seconds

  • Laptop Case

    • Portable liner bag, light and thin, practical, not easy to deform;
    • Foldable three-fold bracket type inner bag, scientific perspective, and convenient for laptop heat dissipation;
    • The folding surface cover is attracted by a strong magnet, which is not easy to open, and it will not collapse when placed horizontally and vertically;
    • It can be hand-held design to prevent the notebook from slipping off, and it is portable when going out;
    • Pen case design at the end of the inner bag, which can be inserted into office pens, and has multiple functions in one package;
    • Contains a four-piece set: a charger bag, a winding belt, a mouse bag, and a notebook liner bag.

    Laptop Case

    $17.80
  • Ki Gateway

    The Ki Gateway is the brain for all Smart Home Eco System. It connect and control all WIFI enabled smart home device.

    →It also acts as an integrated WIFI Mesh that is able to broadcast and repeat WIFI Signal, extending their effective range and stabilizing your network connections

    →End to End Encryption

    →Network Acceleration

    →Dual Bands Frequency

    →Gigabit Speeds (1200Mbps)

    →Universal Gateway

    →2.3/5GHz WIFI

    →App Control

    →Plug and Play

    →Avoid pressing too hard on the device body, rest button, and connecting ports

    →Make sure you are connected with internet before installation

    →Kindly take care of the distance between the devices as range and performance depend on it

    →Press and hold the reset button for 6 seconds, then the indicator light flashes and then release. The indicator light turns on and the system restarts. The last replay flashes to restore the factory settings.

    →Long green light: good connection quality

    →Long yellow: the connection quality is normal

    →Red long light: connection failed

    →Model Number : 312-006, Ki Gateway (WIFI Mesh)

    →LAN ports: 1

    →WAN ports: 1

    →Dimensions (L*W*B): 100*100*95mm

    →Power: 12V, 1A

    →Weight: 300g

    →Wireless Range: 100m outdoor, 15m indoor

    →Wireless Protocol: 2.4GHz, 5GHz WIFI

    →Transfer Rate: 300Mbps, 1000Mbps

    →Nagki app offers an intuitive dashboard and the most comprehensive solution to mange your smart home

    Ki Gateway

    $420.50
  • Smart Home Starter Kit

     Add automation to your existing appliances

    → Compatible with most of your household appliances Aircon, TVs, Fans, Speakers.

    → Turn your connected devices into smart devices

    → Enabling control from your phone, and even adding them into your favorite smart routines.

     

     

     

    →Nagki empowers you to stay connected to you home no matter where you are,

    →Get connected in minute with Nagki’s specialized paring

    →Once you set up Nagki App, it easy to add lights, sensors, camera, and more to enhance your Nagki Smart home

    →Hundreds of connected products gives you freedom to design you ideal smart home

    →TRUE UNIVESAL CONTROL

    →Add Automation to your existing appliance

    →Compatible with most of your household appliances Aircon, TVs, Fans, Speakers

    →Turn your connected devices into smart device Enabling control from you phone, and even adding them into your favorite smart routines

    →Nagki app offers an intuitive dashboard and the most comprehensive solution to mange your smart home

  • Link Gateway

    → The Link Gateway is the processing unit for Zigbee connected device used for home automation. Through out Nagki App, 60+Zigbee device can be connected and controlled

    → Avoid pressing too hard on the device body, rest button, and connecting ports.

    → Make sure you are connected with internet before installation

    → Kindly take care of the distance between the devices as range and performance depend on it.

    → Keep the device within WiFi range

    → Adding Link Gateway: Set Nagki App to add mode. Press and button on the back for 6 times until only red LED blinking rapidly and the app display’s “device found”

    → Removing Link Gateway: Press and hold back button for 10 seconds

    → Factory Reset: Press and hold back button for 15 seconds

    → Model Number: 312-0002, Link Gateway (Zigbee)

    → Protocol : WiFi Zigbee

    → Dimensions (L*W*B): 65*65*13mm

    → Power Rating : DC 5V

    → Connect Device: 60-85pcs

    → Weight : 150g

    → Wireless Range: 100m outdoor, 15m indoor

    → Wireless Protocol: 2.4GHz WiFi, Zigbee

    Link Gateway

    $60.50
  • Ki Motion Sensor

    →The Ki Motion Sensor can work dependently without a hub, it can accurately detect movement in the room, push and start scenes

    →Set it to turn on your lights when you enter a room, or turn off all devices when you leave a room

    →Avoid pressing hard on the device body, reset button, and connection ports

    →Make sure you are connected with internet before installation

    →Kindly take care of the distance between the devices as range and performance depend on it

    →Long battery Life

    →Anti white light

    →Real time monitoring

    →2.4GHz WiFi

    →App control

    →Schedule control

    →Model Number: 312-0010 Ki Motion Sensor

    →Detection Angle: 110°

    →Detect Range: 12m

    →Battery type: 2* AAA

    →Dimensions (L*W*B): 137*60*43mm

    →Power: 35mA

    →Weight: 60g

    →Wireless Range: 100m outdoor, 15m indoor

    →Wireless Protocol: Zigbee

  • Smart Home Link Switch

    The link switch is a battery powered switch that can sync and control any smart home device

    →Place this switch anywhere with its double sided tape

    →Set your favorite scenes setting to each button of the switch for easy and quick controls

    →Long battery life

    →Fully customizable

    →Zigbee Solution

    →App control

    →Schedule control

    →Model Number: 312-0009 Ki Controller (IR,RF)

    →Button cycle: 500,000

    →Battery type: CR 2430

    →Dimensions(L*W*B): 86*86*13mm

    →Power: 10uA

    →Weight: 60g

    →Wireless Range: 100m outdoor, 15m indoor

    →Wireless protocol: Zigbee

    →Avoid pressing too hard on the device body, reset button, and connecting ports

    →Make sure you are connected with internet before installation

    →Kindly take care of the distance between the devices as range and performance depend on it

  • Link Blind Controller

    The Link Blind Controller is a motor for your blinds.

    →Set Blinds automation like opening in the morning and closing at night.

    →With its multiple adapters, it can be used on Venetian blinds, vertical blinds, honeycomb blinds, triple shade, roller shade, zebra shade.

    →Solar charged

    →Touch-Start Function

    →Schedule Control

    →Zigbee Solution

    →App control

    →Plug and play

    →It is always advised to consult a certified installer to perform the installation process

    →Ensure the blinds type matches the technical specifications

    →Make sure you are connected with internet before installation

    →Kindly take care of the distance between the device as range and performance depend on it.

    →Model Number: 312-0013 Link blind controller

    →Power: 5V DC

    →Battery: Rechargeable Lithium Polymer (included)

    →Dimensions (L*W*B): 16.4*4.5*4cm

    →Power source: 5V DC, Solar Panel

    →Weight: 1300g

    →Wireless Range: 100m outdoor, 15m indoor

    →Wireless Protocol: Zigbee

  • Nagki Ambience Light

     The Nagki Ambience Light is a Minimalism metal straight angle floor lamp, for home and lighting decoration.

    → It has 16 Million colors changeable and warm light for your choice.

    → It brings vibrance to any living space.

    → RGBWC light

    → Plug and Play

    → 2.4GHz WIFI

    → App control

    → Schedule control

    → Model Number: 312-0011 Nagki Ambience Light

    → Colors: Red, Green, Blue, Cool White, Warm White

    → Material: Aluminum

    → LED type: 5050

    → Dimensions (L*W*B): 140*35*35cm

    → Power: 5V DC

    → Weight: 1.5Kg

    → Wireless Range: 100m outdoor, 15m indoor

    → Wireless Protocol: 2.4GHz WIFI

    → Ensure power is plugged into the 3 pin UK plug

    → Ensure the power cable is not bend into a knot

    → Kindly take care of the distance between the devices as range and performance depends on it

  • Power Wall Charger Plug Adapter

     Type: Electric

    → Usage: Mobile Phone

    → Material: ABS, PVC, ABS, ABS+PVC

    → Protection: ovp, ocp

    → Function: PD

    → Brand Name: NAGKI

    → Model Number: I-0589 Port: 1 x USB Output: 5V/1A

    → Place of Origin: China

    → Supports Solar Energy: No

    → Keywords: charger

    → Products Status: Stock

    → Package: opp bag

    → Company Type: Factory

    → OEM: Accept

    → USB Type: Standard

    → Color: White

    → Input: 100-240VAC 50/60HZ

     

  • Nagki Doorbell Camera

    → The Ki Doorbell Camera is our front door camera with two way audio access

    → It comes with motion detection even in the nights and will record for suspicious movement

    → It even notify the users in our Nagki App, if there are suspicious movements

    → Avoid pressing too hard on the device body, reset button, and connecting ports

    → Make sure you connected with internet before installation

    → Kindly take care of the distance between the devices as range and performance depends on it

    → Ensure device have sufficient battery

    → Night Vision

    → Two Way Audio

    → Plug and Play

    → 2.4GHz WIFI

    → App Control

    → 32gb SD Memory

    → Model Number: 312-0022, Ki Doorbell Camera

    → Data Storage: Micro SD card, Cloud

    → Video Compression: H.264

    → Resolution: HD: 1920*1080; SD: 704*576

    → Infrared Night Version: 10m Black and White

    → Auto: Two-way, Speaker and Mic

    → Dimensions (L*W*B): 140*35*35CM

    → Power: 5V DC

    → Wireless Range: 100m outdoor, 15m indoor

    → Wireless Protocol: 2.4GHz WIFI

    → Keep the device within WIFI Range

    → Adding Ki Doorbell Camera: Set Nagki App to add mode press and the button below camera for 10 seconds until the sound “please config network”
    → Place QR code from the app 15-30cm in front of the camera The app display’s “device found”

    → Removing Ki Doorbell Camera: Hold the button on the back for 10 seconds

    → Factory Reset: Press and hold panel button for 15 seconds

  • Nagki RGB Smart Light

     The RGB LED bulb fits a wide variety of light sockets with 16million color setting and cool and warm white, It adds whole new dimension to lighting in your room

    → E14

    → E27

    → GU10

    → GU5.3

    → RGBWC Light

    → Dimmable

    → Save Electricity

    → 2.4GHz WIFI

    → App control

    → Schedule Control

    → Keep the device within WIFI range

    → Adding RGB LED bulb: Set Nagki App to add mode turn on and off the power to the bulb 3 times until the light in the Bulb blink and the app displays “device found”

    → Removing RGB LED bulb: Turn on and off the power 3 times

    → Factory Reset: Turn on and off the power 3 times

    → Model Number: 312-0021 RGB LED Bulb

    → Power Rating: 10 W

    → Lumen: 1100

    → Dimensions (L*W*B): 12.5*6.5*6.5cm

    → Power: 100-240V, 50-60Hz

    → Weight: 150g

    → Wireless Range: 100m outdoor, 15m indoor

    → Wireless Protocol: 2.4GHz WIFI

Main Menu