-
Link Blind Controller
The Link Blind Controller is a motor for your blinds.
→Set Blinds automation like opening in the morning and closing at night.
→With its multiple adapters, it can be used on Venetian blinds, vertical blinds, honeycomb blinds, triple shade, roller shade, zebra shade.
→Solar charged
→Touch-Start Function
→Schedule Control
→Zigbee Solution
→App control
→Plug and play
→It is always advised to consult a certified installer to perform the installation process
→Ensure the blinds type matches the technical specifications
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the device as range and performance depend on it.
→Model Number: 312-0013 Link blind controller
→Power: 5V DC
→Battery: Rechargeable Lithium Polymer (included)
→Dimensions (L*W*B): 16.4*4.5*4cm
→Power source: 5V DC, Solar Panel
→Weight: 1300g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless Protocol: Zigbee
$225.50Link Blind Controller
$225.50 -
Philips Hue Play White & Color Smart Light
- INCLUDES POWER SUPPLY. Connect up to 3 Hue Play’s on 1 power supply unit. Requires the Hue Hub / Bridge
- VOICE ACTIVATED: The Philips Hue White & Color Ambiance Bar Light can be controlled using your voice when you have Amazon Alexa, Apple HomeKit, or Google Assistant enabled (Philips Hue Hub and Smart Home Device required and sold separately). Philips Hue smart lights can also be paired for home automation with your existing Nest products or Samsung SmartThings system.
- LIMITLESS POSSIBILITIES: Enhance your smart home with the Philips Hue Play. The design is aesthetically pleasing and will adapt well with any living room setup. Let you smart light stand on your cabinet to create a pleasant ambiance, mount it on the back of your TV or even lay it flat on the floor to brighten your walls from floor to ceiling.
- ULTIMATE TV LIGHTING EXPERIENCE: Create the most beautiful backlight for your television. Just mount Philips Hue Play behind your screen using the clips and double-sided tape included in the pack, and enhance your viewing experience with splashes of light surrounding your television.
- EASY INSTALLATION: Connect not only 1, but up to 3 Hue Plays to the same power supply unit, leaving enough room for other devices. With each additional Hue Play, your smart lighting experience becomes even more immersive. This base kit includes 1 power supply.
- EXPAND YOUR SMART HOME EXPERIENCE: The Philips Hue Play requires the Hue Bridge(sold separately) for the full smart lighting experience.
$207.00 -
Hue White and Color Ambience LightStrip
- 1 x 5-metre lightstrip
- 1 x power supply unit
- White and coloured light
$336.90 -
Hue Dimmer Switch
- Include: 1 Smart Bulb Kit
- Wattage: watts
- Warranty: 1 year on product
- Hue bridge the heart of your Philips hue system
- Start building or expanding your ecosystem with this hue bridge
- Hue-ify your home add up to 50 Philips hue lights to a single hue bridge
- Control your lights the way you want from wherever you are
$37.40Hue Dimmer Switch
$37.40 -
Nagki Ambience Light
→ The Nagki Ambience Light is a Minimalism metal straight angle floor lamp, for home and lighting decoration.
→ It has 16 Million colors changeable and warm light for your choice.
→ It brings vibrance to any living space.
→ RGBWC light
→ Plug and Play
→ 2.4GHz WIFI
→ App control
→ Schedule control
→ Model Number: 312-0011 Nagki Ambience Light
→ Colors: Red, Green, Blue, Cool White, Warm White
→ Material: Aluminum
→ LED type: 5050
→ Dimensions (L*W*B): 140*35*35cm
→ Power: 5V DC
→ Weight: 1.5Kg
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
→ Ensure power is plugged into the 3 pin UK plug
→ Ensure the power cable is not bend into a knot
→ Kindly take care of the distance between the devices as range and performance depends on it
$102.20Nagki Ambience Light
$102.20 -
Power Wall Charger Plug Adapter
→ Type: Electric
→ Usage: Mobile Phone
→ Material: ABS, PVC, ABS, ABS+PVC
→ Protection: ovp, ocp
→ Function: PD
→ Brand Name: NAGKI
→ Model Number: I-0589 Port: 1 x USB Output: 5V/1A
→ Place of Origin: China
→ Supports Solar Energy: No
→ Keywords: charger
→ Products Status: Stock
→ Package: opp bag
→ Company Type: Factory
→ OEM: Accept
→ USB Type: Standard
→ Color: White
→ Input: 100-240VAC 50/60HZ
$10.85 -
Nagki Doorbell Camera
→ The Ki Doorbell Camera is our front door camera with two way audio access
→ It comes with motion detection even in the nights and will record for suspicious movement
→ It even notify the users in our Nagki App, if there are suspicious movements
→ Avoid pressing too hard on the device body, reset button, and connecting ports
→ Make sure you connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depends on it
→ Ensure device have sufficient battery
→ Night Vision
→ Two Way Audio
→ Plug and Play
→ 2.4GHz WIFI
→ App Control
→ 32gb SD Memory
→ Model Number: 312-0022, Ki Doorbell Camera
→ Data Storage: Micro SD card, Cloud
→ Video Compression: H.264
→ Resolution: HD: 1920*1080; SD: 704*576
→ Infrared Night Version: 10m Black and White
→ Auto: Two-way, Speaker and Mic
→ Dimensions (L*W*B): 140*35*35CM
→ Power: 5V DC
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
→ Keep the device within WIFI Range
→ Adding Ki Doorbell Camera: Set Nagki App to add mode press and the button below camera for 10 seconds until the sound “please config network”
→ Place QR code from the app 15-30cm in front of the camera The app display’s “device found”→ Removing Ki Doorbell Camera: Hold the button on the back for 10 seconds
→ Factory Reset: Press and hold panel button for 15 seconds
$195.20Nagki Doorbell Camera
$195.20 -
Nagki RGB Smart Light
→ The RGB LED bulb fits a wide variety of light sockets with 16million color setting and cool and warm white, It adds whole new dimension to lighting in your room
→ E14
→ E27
→ GU10
→ GU5.3
→ RGBWC Light
→ Dimmable
→ Save Electricity
→ 2.4GHz WIFI
→ App control
→ Schedule Control
→ Keep the device within WIFI range
→ Adding RGB LED bulb: Set Nagki App to add mode turn on and off the power to the bulb 3 times until the light in the Bulb blink and the app displays “device found”
→ Removing RGB LED bulb: Turn on and off the power 3 times
→ Factory Reset: Turn on and off the power 3 times
→ Model Number: 312-0021 RGB LED Bulb
→ Power Rating: 10 W
→ Lumen: 1100
→ Dimensions (L*W*B): 12.5*6.5*6.5cm
→ Power: 100-240V, 50-60Hz
→ Weight: 150g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
$41.20Nagki RGB Smart Light
$41.20 -
Ki Fire Alarm
→The Ki Fire Alarm has a reliable smoke detection function: the thermal sensor will warm before a fire outbreak, 85 dB loud warning, mute function in the case of false alarm, and notify users when the alarm occurs.
→Photoelectric smoke detection and thermal sensors ensure reliability
→Avoid pressing hard on the device body, reset button, and connecting ports
→Make sure you are connected with internet before installation
→Kindly take care of the distance between the devices as range and performance depend on it
→Ensure the Ki fire alarm is at least 50cm away from stove or any fire source
→Long battery life
→Smart alarm
→2.4GHz WIFI
→App control
→Plug and play
→Model Number: 312-0017 Ki Fire alarm
→Power: 5V DC
→Battery: 2* AAA Battery
→Dimensions (L*W*B): 125*125*35mm
→Monitoring Range: 30Sqm
→Weight: 250g
→Wireless Range: 100m outdoor, 15m indoor
→Wireless protocol: 2.4GHz WIFI
→Keep the device within WIFI range
→Adding Ki Fire Alarm: Set Nagki App to add mode, Press and hold front button for 10 seconds ntil the all the LEDs blink in red color and the app displays “device found”
→Removing Ki Fire Alarm” Hold the button on the back for 10 seconds
→Factory Reset: Press and hold panel button for 15 seconds
$61.30Ki Fire Alarm
$61.30 -
Ki Camera
→ The Ki camera can track and follow the object of interest. Its 360 degrees motion and pan and tilt features, allows you to view from all angles.
→ Its inbuilt Night vision and expandable storage capacity help to keep track of your loved ones wherever you are.
→ You can hear your love ones when you are not around with its audio recording function
→ Full motor motion
→ 128Gb SD Memory
→ Night Vision
→ Two Way Audio
→ Plug and Play
→ 2.4GHz WiFi
→ App Control
→ Schedule control
→ Model Number: 312-0012 Ki Camera
→ Data Storage: Micro SD card, Cloud
→ Video Compression: H.264
→ Resolution: HD: 1920*1080; SD: 704*576
→ Infrared Night Vision: 10m Black and White
→ Audio: Two-way, Speaker and Mic
→ Dimension (L*W*B): 140*35*35cm
→ Power: 5VDC
→ Weight: 300g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
$92.20Ki Camera
$92.20 -
Smart Home Controller
→ The Ki controller is able to control IR/RF electronics like Fan, TV, Air-Con, Speakers and more. Add your existing appliances to your smart home easily with the ki controller
→ 360° wide coverage
→ Schedule control
→ 2.4GHz WiFi
→ App control
→ Plug and play
→ Model Number: 312-0008 Ki Controller (IR/RF)
→ Infrared Frequency: 38-56k
→ Radio Frequency: 315-433Mhz
→ Dimensions (L*W*B): 60*60*40mm
→ Power: 12v, 1A (Type-C USB)
→ Weight: 200g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WiFi
→ Avoid pressing too hard on the device body, reset button, and connecting ports
→ Make sure you are connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depend on it
→ Power on using USB socket
→ Ensure Ki controller have line of sight to device you are trying to control
$50.40Smart Home Controller
$50.40 -
Smart Home Ki Socket (RGB)
→ Avoid pressing too hard on the device body, rest button, and connecting ports.
→ Make sure you are connected with internet before installation
→ Kindly take care of the distance between the devices as range and performance depend on it.
→ This plug requires the UK head and is accepting any UK plug appliances.
→ Keep the device within WiFi range
→ Adding Ki Socket: Set Nagki App to add mode. Press and hold the Side On button for 10 seconds until the LED blink in red color and the app display’s “device found”
→ Removing Ki Socket: Press and side button for 10 seconds
→ Factory Reset: Press and hold panel button for 15 seconds
→ Model Number: 312-0007, Ki Socket (RGB)
→ Power : 100-240V, 50-60Hz
→ Scene light: RGB
→ Dimensions (L*W*B): 40*30*30mm
→ Maximum Load: 240V, 16A
→ Weight : 300g
→ Wireless Range: 100m outdoor, 15m indoor
→ Wireless Protocol: 2.4GHz WIFI
$40.20Smart Home Ki Socket (RGB)
$40.20